It’s very common to experience excessive iron contamination in water, especially when it comes to the well water supply. However, you don’t have to worry about the excessive amount of iron in well water as there is a wide range of solutions available for this problem. Using the best water softener system for iron removal is one of the ultimate solutions that you can consider to remove an excessive amount of iron from water.
Remember, the high levels of iron in the water supply often cause some annoying household problems. Iron stains on household appliances, showers, fixtures, dishes, laundry, and pipes are among the most common issues. Moreover, the excessive presence of iron in water may also create an offensive smell and sour taste, further creating problems. In this article, we will review the 5 best water softeners for iron removal that you should purchase for your household water supply. This article will also cover honest and unbiased reviews of those water softener brands for your additional convenience.
Without any delay, let’s take a look at water softeners for iron removal in 2024. We selected these products after reviewing consumer reports. Check out our experts recommended products below:
The Iron Pro 2 Fleck 5600SXT is a very popular all-in-one water softener that offers an impressive 48,000 and 64,000-grain capacity. It removes hardness up to 75gpg but can also remove high iron and manganese. An iron filter comes with this unit and when we use it with its popular mesh resin it works twice more effectively against iron than any other water-softening unit. Only a few units are capable of removing traceable sulfur content from the water and AFWFilters Iron Pro 2 is one of them.
Fleck digital metered valve comes with this softening system for extra convenience and efficiency. The digital valve control head has a warranty of 5 years while the brine tank has 10 years warranty. In Iron Pro 2, you can also make several adjustments to its digital control system to alter the capacity or salt usage. The installation of this Water Softener is also straightforward and easy. With its standard 1″ MNPT thread, you can easily connect it to your plumbing system.
Moreover, the price range of this fleck iron pro 2 system is also quite affordable for those looking for clean healthy water from their wells.
Pros
Highly efficient against removing iron, manganese, sulfur, and other hardness compounds.
Water softener with an iron filter.
Easy & quite a simple installation.
NSF Certified.
Cons
A bit heavy in weight.
Can be tricky to install without plumbing experience.
Iron Pro 2 can remove up to 2 ppm of sulfur besides iron. However, it can remove around 1,000 different particles from water, providing pure, clean, and healthy water for drinking, showering, and also water spot-free dishwares.
The Durawater Fleck 5600 SXT is known for its remarkable efficiency and cost-effectiveness. It’s an excellent water softener for well water that will remove the excess iron and other hardness-causing compounds. The capacity of this softening system is quite remarkable, and it can efficiently serve up to 5 members of the house without causing any water shortage. The fine mesh resin will also effectively remove the iron contents from water and ensure a longer lifespan. The Fleck 5600SXT digital metered valve will also deliver maximum efficiency and ease of use without any hassles.
Durawater can effectively remove iron in well water up to 6-8ppm and has a meter-based regeneration system. Another incredible thing about this iron water softener is that it’s certified and purely made in the USA. Apart from its features, you will also get a Pentair Scan and Service application in this well water softener system. It will also ensure you its configuration, technical information, spare parts, and troubleshooting manual. With basic plumbing knowledge, you can easily install this water softener system for well water with iron within 2 hours.
Pros
Purely Made in the USA.
Multi-purpose softener with fleck iron filter.
Easy to Install.
Fine mesh resin to clean iron.
Cons
Poor construction of some parts.
Durawater Iron Pro 48k eliminates the hard Water that causes harm and reduces soap efficiency with high capacity, just as AFWFilters does. Fleck Iron filters, Pentair Scan, and service applications make it the best water softener for iron.
If you are looking for iron removal then Pentair water softener is a great option at an affordable price tag. Moreover, if you want to get rid of excessive limescale build-up and clogging in your house plumbing system, then Pentair Fleck Water Softener will be the ultimate solution. It’s professionally designed in such a unique way that it will extract most of the calcium, magnesium, sulfur, and other hardness-causing compounds.
The Fleck (Pentair) system uses more water and salt during regeneration. Depending on the frequency of your regenerations, this may not be a concern. The upgraded 10% crosslink resin helps prolong the life expectancy of the beads, as well. Standard 1″ male pipe thread connector included, but if you need another size, the supplier will include it at no additional cost. Moreover, the installation process is also straightforward. Even if you have basic plumbing skills, you can easily connect this fleck-softening unit with a home water supply and plumbing system. The brine tank of this Fleck WS48-56SXT Water Softener can also easily store 250 pounds of pelletized salt for better filtration.
Pros
Excellent durability.
The USB drive has detailed instructions to allow homeowners to install their own water-softening unit.
New Latest Fleck 5600SXT digital on-demand control valve.
Reasonable price.
Cons
The salt top-up is a bit hectic.
Some reported issues with a leak in the bypass valve, typically resolved with a sealant.
Preloaded resin, easy installation, the latest Fleck 5600SXT digital control valve, and a 5-year warranty make Pentair WS48-56sxt10 the best water softener for iron removal.
The iSpring WGB32BM is a very famous 3-stage whole-house water filtration system that offers several benefits. his three-stage system uses a pre-filter to collect sediment like sand, dirt, and rust, which often infiltrate drinking water from underground wells. The second stage filter targets chlorine, VOCs, and other contaminants with a carbon block filter. Finally, to handle the specific needs of well water, the iSpring filtration system has a heavy metals filter that reduces iron, manganese, and other heavy metals often found in well water. Fortunately, the high-quality filters used in the iSpring WGB32BM Water Softener also offer a longer lifespan of up to 3 times.
The installation of the iSpring WGB32BM Water Softener is also effortless, and it won’t take more than 2 hours to connect this water filtration system to your household water supply. It offers a 100,000-gallon total capacity which will be more than enough for your entire family. However, the customer support service of iSpring is also worth mentioning as they provide excellent customer support with more than one year of warranty.
If you are looking for an efficient iron water filtration system, then this iSpring whole-house water filtration system will be the best choice. This iSpring softening unit can effectively remove more than 95% of the sediment, pesticides, herbicides, industrial, and several other contaminants from water.
Pros
Excellent 100,000-gallon capacity.
It is equipped with a pp-layered sediment filter.
Highly effective against most of the contaminants.
Reasonable price.
Cons
Some complaints about poor quality construction.
By using the iSpring whole house filtration system for iron and manganese, you can also be assured that a wide range of heavy metals will be removed from the well water supply.
The Tier1 Essential Series Water Softener comes with a Fleck 5600SXT Digital Meter Control Valve for better efficiency and convenience. An energy-efficient water softener that will help you to save thousands of bucks yearly as it will enhance the effectiveness of soaps and detergents. Space-saving design that takes up, on average, four fewer feet of floor space. This economical, high-efficiency system comes complete with a preloaded resin tank, brine tank, LCD Display, and head, plus the tubing required for standard installation. Its lower-than-average footprint is ideal for tight spaces.
You can save hundreds of dollars yearly with this water filtration system as it will remove 95% of the minerals. However, the only downside of this Tier1 WS-165-150 softening unit is the extended regeneration time. You can avoid any inconvenient situation by manually setting up the regeneration cycle for 2:00 AM when there is significantly less water consumption. The storage capacity is around 48,000 grains before every regeneration cycle. Moreover, the price is also quite reasonable as compared to other water softener brands for iron removal available in the market.
Pros
High flow rate at 11.2 GPM.
Easy to Install.
Digital metered control valve.
Cost-effective, offers value for the money.
Cons
Little Water disruption during the regeneration cycle.
While the unit does have a bypass valve, it is manual.
Features like 3 3-stage regeneration cycle, LCD display, latest fleck control valve, and space-saving design make Tier 1 the best water softener for well water with iron.
Buying Guide of Water Softener for Well Water with Iron
When choosing the best water-softening unit for your home, apartment several questions need to be answered. Water hardness level is different in different areas. Now, there will be several different questions in your mind in order to find the top water softener for well water with iron.
Household Size
If you are searching for a water softening system for your family home, your needs and usage will be different than someone who is looking to get a water softener filtration system or RV. According to most studies, the average human being uses 80 gallons of water per day. The typical family of 4 uses 33,000 GPI of softened water daily, keep this in mind when starting your search for a water softener with iron removal.
Water Hardness Level
To find out the home water softener, we need to check the hardness of your home water. This will you exactly what elements, sediments, and chemicals are in the water and, most importantly, the grains per gallon (GPI) within your water supply. You can figure out these levels in a few different ways. If you are using a city water supply, you can request a water report from your city. But if you are using well water or other supplies, you can purchase a water testing kit to find out the hardness level.
Decide the Brand
Different brands are providing different types of water softeners. Moreover, my suggestion is to not go for a water-softening brand just because it provides the cheapest rates. Before choosing the best brand, get the rates from at least 2-3 companies and inquire them about the service they provide and warranty details. Of course, this will take some time but believe me, it is definitely worth it.
Price
Water softener systems can range from a few hundred dollars to thousands depending upon the features and added programming capabilities that you can purchase. But some of those are not necessary, they are nice to have, but you can still get a quality water softener that does that job at a more affordable number.
When water is considered “hard,” this means that more elements and toxins in the water can cause issues with your water supply. So, soft water is healthier and better for skin, hair, drinking, and glassware.
2. Do I need an iron filter and a water softener?
When it comes to iron removal, water softeners are effective when iron concentrations are low and all or most are in a soluble state. For relatively high levels of inorganic iron, an iron filter may be a necessary thing to your home’s water softener.
3. Do water softeners remove iron from well water?
Water softeners remove small amounts of iron. A typical water softener contains resin beads that are designed to remove the hardness minerals calcium and magnesium through a process known as ion exchange.
4. What is the best water softener to remove iron?
As a result, we hope our comprehensive review of the best water softeners for iron removal in well water will help you to choose the best whole-house water softener. Also, we have compiled all these products based on our detailed research on this topic. Moreover, we have also tried our utmost to discuss the most common drawbacks of these above-mentioned products to make your decision-making process more manageable. If you haven’t chosen any reliable water softener yet, then choose it now, and don’t forget to share your feedback with us.
Steve Smith is a United State Licensed Plumber with over 18 years of plumbing experience. Steve has conducted residential and commercial plumbing jobs throughout the state and currently works for one of California’s largest plumbing companies. When he’s not working, Steve enjoys spending time with his daughter and son.
Leave a Reply